Props if true, that’s a hard job. I’m a field service engineer(glorified mechanic) for shit that couldn’t arrive on site, much less be installed without forklifts.
The way to reset the error codes on a Crown PC4500 pallet jack is to scroll to service using the onboard menu and enter the four digit password, select Events, and go to 3.2, 3.2.1 if you’re on older firmware and hit enter.
There are 8 bolts in the stock wheel of an SP3500. 4 holding the motor down, 5 holding the dash on and four holding the top two light panels, two on each side and a fan on the right. Every bolt holding the frame of the panel is 9/16in and is held on with a lockwasher.
Props if true, that’s a hard job. I’m a field service engineer(glorified mechanic) for shit that couldn’t arrive on site, much less be installed without forklifts.
The way to reset the error codes on a Crown PC4500 pallet jack is to scroll to service using the onboard menu and enter the four digit password, select Events, and go to 3.2, 3.2.1 if you’re on older firmware and hit enter.
There are 8 bolts in the stock wheel of an SP3500. 4 holding the motor down, 5 holding the dash on and four holding the top two light panels, two on each side and a fan on the right. Every bolt holding the frame of the panel is 9/16in and is held on with a lockwasher.