cross-posted from: https://retrofed.com/c/linux@programming.dev/p/2487965/mnt-reform-next-looks-awesome-and-started-shipping-this-month

If you didn’t know, MNT is a bit like Framework, but they truly embrace the open hardware ethos and make some awesome looking computers. Their devices ship with Debian out of the box and are manufactured in Germany 🇩🇪.

The original MNT Reform shipped with a Rockchip RK3588, a mechanical keyboard, a trackball, replaceable 18650 LiFePO4 battery cells, a 12.5" 1080p display, and a chunky aluminium body. They later released the Pocket Reform, which was very cute with an ortholinear keyboard and a 7" display.

The new MNT Reform Next has a slimmer design compared with the original, while keeping the mechanical keyboard, eight 18650 battery cells, and the 12.5" display. It uses a glass trackpad instead of a trackball (which supports multitouch gestures!), with mechanical left/middle/right click buttons. It looks like an awesome device for the right kind of person, and like their other computers, and firmware is all open-source and the design is open too!

Crowdsupply link: https://www.crowdsupply.com/mnt/mnt-reform-next

Certainly not a device for everybody, given that it’s over a thousand Euros, but it’s a very cool project! If you have the money and want to support open hardware, it’s definitely a neat device to look at :>

  • kirao47@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    5 hours ago

    Looked cool at first but man the hardware / extendability is meh… Either the 16/32GB ram is worth 1000 bucks or I dont know

  • Supercrunchy@programming.dev
    link
    fedilink
    English
    arrow-up
    4
    ·
    7 hours ago

    Interesting concept to have the individual 18650 batteries being accessible and replaceable. It’s probably the only time I’ve seen it in a laptop.

    I sort of want to see the face of people when you open up the battery compartment saying “sorry i need to put new batteries in my laptop because they ran dry”,

  • kibiz0r@midwest.social
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 day ago

    That’s a very weak SoC. You could buy a retro handheld with an RK3588 for $160 in 2024. You could buy a used Thinkpad X13s with a Snapdragon 8cx gen 3 (basically 3x the performance) for $300 today. (And they are a delight with Armbian)

    • sbird@retrofed.comOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 day ago

      It’s still impressive hardware, it looks like a lot of engineering and design has gone into making all the parts work together well! The mechanical keyboard and the 18650 cells are features that aren’t on any other laptop, and the device just looks really awesome too (esp in the metallic purple)!

      100% it is not a daily driver machine for most people, but it’s a cool project nonetheless with fully open hardware and firmware! For those who want to support that sort of thing, it’s something to look at :D

    • B0rax@feddit.org
      link
      fedilink
      English
      arrow-up
      1
      arrow-down
      1
      ·
      1 day ago

      I agree, for that price, they should have chosen a better SOC.

      • sbird@retrofed.comOP
        link
        fedilink
        English
        arrow-up
        4
        ·
        edit-2
        1 day ago

        MNT Research is a very small group, way smaller than even Framework, and they do not have the sales volume either (I think their first batch of the Reform Next was only 16 devices). The Rockchip RK3588 is certainly decent and one of the more powerful ARM chips available to them (8 cores, and it looks like it can run some basic games too)

        It’s still such a cool project, and it’s all open hardware too! Definitely not for everybody though, for most people I would rather go with a more established laptop manufacturer (System76, Tuxedo 🇩🇪, Slimbook 🇪🇸, etc. all make fantastic Linux offerings, and most Windows laptops run Linux perfectly as long as you have a recent kernel)

        • tiramichu@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          1 day ago

          I know from being part of the mechanical keyboard community that when your sales volumes are at that low sort of scale, you’re essentially having all your aluminium frames machined and anodised as “prototype” batches and hand-assembling everything without any economies of scale.

          Which is expensive.

          So yeah, it’s absolutely fair to say that it is expensive and underpowered and you can get a better machine (which was manufactured at immense corporate scale) used on auction sites for a fraction of the price. That’s totally true.

          But it’s also kinda not the point of this.